© APARNATHI. Unauthorized use of this design is prohibited and will be subject to legal action.”
APARNATHI AVENTO H.S. — Full Technical Specification
🏁 General Information
| Category | Specification |
|---|---|
| Vehicle Class | High-Performance Twin-Turbo Sports Coupe |
| Build Name | APARNATHI Performance Edition |
| Configuration | Track-Focused Street Machine |
| Body Type | Carbon Fiber Performance Coupe |
🔧 Engine & Performance
| Category | Specification |
|---|---|
| Engine | 6.2L V8 Twin-Turbocharged Engine |
| Turbo System | Twin Ball-Bearing Turbochargers |
| Intercooler | Front-Mounted Performance Intercooler |
| Nitrous System | Direct-Port Nitrous Injection (100–200 HP Shot) |
| Base Power Output | ~780 HP |
| Power with Nitrous | 920+ HP |
| Torque | Approx. 980 Nm |
| Fuel System | High-Pressure Dual Pump Racing Setup |
| Cooling | Oil Cooler + Turbo Cooling + Transmission Cooler |
⚙ Transmission & Performance Figures
| Category | Specification |
|---|---|
| Transmission | 7-Speed Dual-Clutch Automatic |
| Drivetrain | Rear-Wheel Drive with Electronic LSD |
| 0–100 km/h | ~2.9 Seconds |
| Top Speed | ~355 km/h |
| Quarter Mile | ~9.8 Seconds |
📏 Vehicle Dimensions
| Measurement | Specification |
|---|---|
| Overall Length | 4,520 mm |
| Overall Width | 2,040 mm (Widebody) |
| Overall Height | 1,180 mm |
| Wheelbase | 2,650 mm |
| Front Track Width | 1,720 mm |
| Rear Track Width | 1,760 mm |
| Ground Clearance | 95 mm |
| Curb Weight | ~1,420 kg |
🛞 Wheels, Tyres & Brakes
| Component | Specification |
|---|---|
| Front Wheels | 19×10J Forged Racing Alloys |
| Rear Wheels | 20×12J Forged Racing Alloys |
| Front Tyres | 275/35 ZR19 Semi-Slick Performance |
| Rear Tyres | 335/30 ZR20 Wide Semi-Slick |
| Brakes | Carbon-Ceramic Performance Braking System |
| Calipers | 6-Piston Front / 4-Piston Rear |
🧱 Suspension & Stance
| Component | Specification |
|---|---|
| Suspension Type | Fully Adjustable Racing Coilovers |
| Front Ride Height | 85 mm |
| Rear Ride Height | 95 mm |
| Chassis | Carbon-Reinforced Lightweight Frame |
| Handling Setup | Track-Tuned Stability & Grip |
🧩 Aerodynamics & Exterior
| Component | Specification |
|---|---|
| Body Material | Full Carbon Fiber Panels |
| Front Splitter Extension | 90 mm |
| Side Skirts Depth | 70 mm |
| Rear Diffuser Depth | 120 mm |
| Rear Spoiler Height | 140 mm |
| Underbody | Flat Aero Performance Floor |
🎮 Interior & Driver Focus
| Component | Specification |
|---|---|
| Interior Trim | Alcantara + Carbon Performance Finish |
| Seats | Racing Bucket Seats |
| Cluster | Digital Performance Display |
| Drive Modes | Street / Sport / Track / Nitrous Mode |
| Safety Setup | Reinforced Performance Roll Structure |
🏁 APARNATHI AVENTO H.S. — Interior Specifications
| Category | Specification |
|---|---|
| Cabin Layout | Driver-Focused Performance Cockpit |
| Seat Type | Lightweight Racing Bucket Seats |
| Seat Material | Alcantara with Carbon Fiber Shell |
| Seat Support | Integrated Headrest & Side Bolsters |
| Harness Compatibility | 4-Point Racing Harness Ready |
| Interior Trim | Carbon Fiber Panels with Alcantara Finish |
| Stitching | Contrast Performance Stitching |
🎮 Driver Controls
| Category | Specification |
|---|---|
| Steering Wheel | Flat-Bottom Performance Wheel |
| Steering Material | Alcantara with Carbon Inserts |
| Paddle Shifters | Aluminum Performance Paddles |
| Drive Mode Control | Steering-Mounted Selector |
| Start System | Push-Button Ignition |
📟 Displays & Electronics
| Category | Specification |
|---|---|
| Instrument Cluster | Fully Digital Performance Display |
| Center Screen | Performance Touch Interface |
| Telemetry System | Real-Time Data Monitoring |
| Track Features | Lap Timer & Performance Logging |
| Performance Gauges | Turbo Boost + Nitrous Status Display |
🔊 Comfort & Cabin Tech
| Category | Specification |
|---|---|
| Climate Control | Dual-Zone Performance Climate System |
| Lighting | Ambient Sport Cabin Lighting |
| Entry System | Keyless Entry & Start |
| Door Panels | Lightweight Performance Panels |
🛡 Safety & Structure
| Category | Specification |
|---|---|
| Safety Frame | Integrated Roll Protection Structure |
| Interior Reinforcement | Carbon Structural Elements |
| Materials | Fire-Resistant Performance Fabric |
| Driver Monitoring | Performance Safety Monitoring System |
💰 APARNATHI AVENTO H.S. — Full Build Cost Estimate (India)
🎨 1. Design & Engineering Phase
| Item | Estimated Cost |
|---|---|
| Exterior design + 3D modelling | ₹8 – 15 lakh |
| Aerodynamic simulation & testing | ₹5 – 10 lakh |
| Chassis engineering & CAD work | ₹10 – 18 lakh |
| Powertrain integration design | ₹6 – 12 lakh |
Subtotal: 👉 ₹30 – 55 lakh
🧪 2. Prototype Development
| Item | Estimated Cost |
|---|---|
| Custom carbon fiber body fabrication | ₹45 – 70 lakh |
| Prototype chassis fabrication | ₹25 – 40 lakh |
| Custom suspension development | ₹8 – 15 lakh |
| Prototype wiring & electronics | ₹6 – 12 lakh |
| Interior prototype fabrication | ₹10 – 18 lakh |
Subtotal: 👉 ₹95 lakh – ₹1.55 crore
🔧 3. Engine & Performance Systems
| Item | Estimated Cost |
|---|---|
| 6.2L Performance V8 engine build/import | ₹35 – 70 lakh |
| Twin turbo system setup | ₹12 – 20 lakh |
| Nitrous system install | ₹2 – 5 lakh |
| Cooling + intercooler setup | ₹5 – 8 lakh |
| Custom exhaust fabrication | ₹4 – 7 lakh |
Subtotal: 👉 ₹58 – 1.10 crore
⚙ 4. Drivetrain & Mechanical Components
| Item | Estimated Cost |
|---|---|
| Dual-clutch transmission | ₹18 – 35 lakh |
| Differential + driveshaft setup | ₹6 – 12 lakh |
| Racing brakes (carbon ceramic) | ₹12 – 20 lakh |
| Steering & control systems | ₹5 – 8 lakh |
Subtotal: 👉 ₹41 – 75 lakh
🛞 5. Wheels, Interior & Finishing
| Item | Estimated Cost |
|---|---|
| Forged wheels & semi-slick tyres | ₹6 – 10 lakh |
| Alcantara interior + racing seats | ₹10 – 18 lakh |
| Digital cluster & electronics | ₹6 – 12 lakh |
| Paint/Carbon finishing & detailing | ₹8 – 15 lakh |
Subtotal: 👉 ₹30 – 55 lakh
🏁 TOTAL PROJECT COST ESTIMATE
| Stage | Cost Range |
|---|---|
| Design Phase | ₹30 – 55 lakh |
| Prototype Phase | ₹95L – ₹1.55Cr |
| Engine & Performance | ₹58L – ₹1.10Cr |
| Drivetrain | ₹41 – 75L |
| Finishing & Interior | ₹30 – 55L |
🏭 If You Produce Multiple Cars
| Units | Approx Cost Per Car |
|---|---|
| 1 Prototype | ₹3.5 – 4 Cr |
| 5 Cars | ₹2.6 – 3 Cr each |
| 10+ Cars | ₹2.2 – 2.6 Cr each |
(Because tooling & design cost gets divided)
🏁 APARNATHI AVENTO H.S. — Production Roadmap
🚀 Phase 1 — Concept & Planning (Month 1–2)
Goal: Turn idea into a clear project plan
Steps:
-
Finalize design vision (hypercar / track / street use)
-
Decide performance targets (HP, speed, weight)
-
Define budget & timeline
-
Create rough sketches & digital concept renders
-
Choose base engine + drivetrain platform
✅ Output: Concept design + project blueprint
🎨 Phase 2 — Digital Design & Engineering (Month 3–6)
Goal: Convert concept into buildable design
Steps:
-
Create full 3D CAD model of car
-
Engineer chassis structure & mounting points
-
Design suspension geometry
-
Simulate aerodynamics (downforce, airflow)
-
Plan cooling system & engine layout
-
Design wiring, electronics, dashboard layout
✅ Output: Complete engineering files ready for fabrication
🧱 Phase 3 — Prototype Fabrication (Month 7–12)
Goal: Build the first physical car body & structure
Steps:
-
Fabricate prototype chassis frame
-
Build carbon fiber body molds
-
Produce first body panels
-
Install suspension, brakes, steering
-
Fit interior frame & safety structure
✅ Output: Rolling chassis prototype (no engine yet)
🔧 Phase 4 — Powertrain Integration (Month 13–16)
Goal: Make the car functional
Steps:
-
Install engine + turbo system
-
Fit transmission & drivetrain
-
Install cooling, intercooler & exhaust
-
Wire electronics + ECU tuning
-
Add fuel system & nitrous setup
✅ Output: Running prototype vehicle
🧪 Phase 5 — Testing & Development (Month 17–20)
Goal: Fix issues & improve performance
Steps:
-
Engine reliability testing
-
Suspension tuning
-
Brake performance testing
-
Aerodynamic stability testing
-
Heat management testing
-
Safety inspections
✅ Output: Fully validated prototype
🎯 Phase 6 — Final Production Spec (Month 21–22)
Goal: Freeze the final design
Steps:
-
Improve body fit & finish
-
Upgrade materials where needed
-
Final ECU tuning
-
Final interior design
-
Create production documentation
✅ Output: Final production-ready car spec
🏭 Phase 7 — Limited Production Build (Month 23–28)
Goal: Build final cars for sale or showcase
Steps:
-
Produce final carbon body panels
-
Assemble chassis + engine systems
-
Install interior + electronics
-
Paint / finish / detailing
-
Quality control inspection
✅ Output: Finished APARNATHI Performance Coupe
⏱ TOTAL PROJECT TIMELINE
| Stage | Duration |
|---|---|
| Concept & Design | 2 months |
| Engineering | 4 months |
| Prototype Build | 6 months |
| Integration | 4 months |
| Testing | 4 months |
| Finalization | 2 months |
| Production | 6 months |
👉 Total Time: ~24–28 months
(2 to 2.5 years for full project)
👉 VIBRANCE
Disclaimer :
This design and concept have been created exclusively by APARNATHI.
Any unauthorized use, copying, reproduction, modification, or distribution of this design, in whole or in part, without prior written permission from APARNATHI, is strictly prohibited.
Legal action will be taken against any individual or entity found using this design without authorization.
